Report inadequate content


CX4 Cables and Infiniband 10G peers for maximum network

10GBase-CX4 is an IEEE specification for 10 Gigabit over coaxial cable, intended to connect servers, switches and storage over short distances of up to 15 metres/50 feet. 10GBase-CX4 or 802.3ak uses the Infiniband 4X connector to maximize signal strength and can support data transfers of up to 10 Gigabits per second, 10 times as fast as gigabit Ethernet. It combines low cost...



with the latest generation of Mini-SAS HD SFF-8088 cable

This is because a single SFF-8088 connector on a SAS Expander-enabled controller can connect to a large SAS Expander-enabled enclosure, This 4x Mini-SAS cable features universal keyed 26-pin SFF-8088 cable pull to release connectors. The lanyard disconnect pull-to-release connector is compatible with all mini-SAS ports. In fact, many makes of SFF-8088 cables look like four 7-pin...


SFF-8088 cable quality materials and is backed by StarTech

QSFP+ (Quad Small Form-factor Pluggable) to MIniSAS SFF-8088 cable hybrid cables are designed for high-density Serial Attached SCSI (SAS) applications. These cables are used as an interconnect solution between newer QSFP+ Hardware and older external 3G and 6G Mini SAS equipment and provide data transfer rates up to 10Gbops per channel at distances of up to 10 meters. These cables ...


10Gtek's SFP+ Passive DAC cables products typically have limited or no backward

It should be noted that while most servers are open, compatibility issues can occur with a few CNA server cards (noted below). Additionally some FCoE ports require active copper cables. Panduit SFP+ 10 Gb/s Active and Passive Cable Assemblies are compatible with any switch or server that includes MSA compliant SFP+ ports, unless that product requires active cable assemblies or...



10G SFP+ cables which is twinax cable with SFP+ connector

Through the PEB-10G/SFP+ series Ethernet adapter, users are able to enable fiber solution over SFP+ LR optical module and SFP+ SR optical module,and they use SFP+ copper twinaxial cables up to 5 m (16.4 ft) in length.Dramatically reducing 10G interconnectivity costs, the 10G cables can provide inexpensive and reliable 10G speed connections using either copper cables with...


OM2 Duplex use of more cost-effective light emitting diodes

In addition, ISO/IEC 24702 (Generic cabling for industrial premises) specifies OS2. The international standards call these “OF types”. In Europe and the UK,BS EN 50173-1:2007 contains all five and calls them “Optical fibre cable Categories”. Whilst there is no difference in the actual specifications as shown in Tables 1 and 2 below, it is important to clarify the...


QSFP+ cables are designed for data rates

The cables incorporate E/O and O/E conversion built into the connector shell to yield a dramatic improvement in PCB real estate utilization.This QSFP+ transceiver supports link lengths for either 40 Gigabit Ethernet or high density 10 Gigabit Ethernet applications up to 100 meters using OM3 fiber or 150 meters using OM4 fiber. These modules are designed to operate over multimode...


OM1 Duplex which make them useful in more environments

In Europe and the UK,BS EN 50173-1:2007 contains all five and calls them “Optical fibre cable Categories”. Whilst there is no difference in the actual specifications as shown in Tables 1 and 2 below, it is important to clarify the intention of these naming schemes. A short distance from these identification rings heat shrink is applied to maintain an easy to manage bonded ...


OM1 Duplex it is important to clarify the intention

Their one piece design is supplied in beige to differentiale it from the blue singlemode version. Supplied with dust caps.Excel duplex patch leads are manufactured from the highest quality 900 or 600?m optical fibre, terminated with ceramic ferrule connectors of various types. Cable preparation, termination and testing is carried out to strictly managed procedures in an Excel ...


Active SFP+ Cables assemblies also incorporate Rx LOS and Tx Disable features

The passive cable assembly design has no signal amplification in the cable assembly. Electronic Dispersion Compensation (EDC) is typically used on host board designs when passive SFP+ Cables copper assemblies are utilized. EDC allows for an extended length of passive cable assemblies. The industry standard EEPROM signature enables the host system to differentiate between a ...