Report inadequate content

(SFP) transceivers operate at SFP 1.25Gb/s and are compatible

{
}

 (SFP) transceivers operate at SFP 1.25Gb/s and are compatible

In 1000BASE-T and 100BASE-TX modes, the transmit data stream is scrambled to reduce radiated emissions and to ensure that there is no correlation between symbols in the data stream.Supporting 10/100/1000 Mbps data-rate in excess of 100 meters (325 feet) reach over UTP Category 5/5e cables, the robust SFP-1GBT-05 transceiver module is ideally suited for implementing small form-factor Network Interface Cards (NICs) and uplinks. As such, it is highly appropriate for use in such high-density applications as LAN 1000BASE-T, switch-to-switch interfaces, switched backplanes, blade servers, gaming devices, and router/server interfaces.

The module is intended for multimode fiber, operates at a nominal wavelength of 850nm, and complies with Multi-Source Agreement (MSA) Small Form Factor Pluggable (SFP). Each module consists of a transmitter optical subassembly, a receiver optical subassembly, and an electrical subassembly. All are housed in a metal package and the combination produces a reliable component. The module is a duplex LC connector transceiver designed for use in Gigabit Ethernet applications and to provide IEEE-802.3z compliant link for SFP 1.25Gb/s Series short reach applications. The characteristics are performed in accordance with Telcordia Specification GR-468-CORE.The SFP-WB-M from AAXEON is the high performance and cost-effective module for serial optical data communication applications specified for multimode of multi-rate from 125M to 1.25 Gb/s. TAGS:

{
}
{
}

Leave your comment (SFP) transceivers operate at SFP 1.25Gb/s and are compatible

Log in to Obolog, or create your free blog if you are not registered yet.

User avatar Your name